Xantrex Truecharge 2 - 12V 40A Battery Charger
Xantrex Truecharge2 12 Volt 40 Amp Battery Charger
TRUECHARGE 2 20
Designed primarily for marine and commercial applications worldwide, TRUECHARGE 2 Battery Chargers are unmatched for reliability. Available in three 12-volt models, they are versatile enough to be used in a wide variety of conditions and locations. Auto-ranging AC input voltage capability (90 - 265 volts AC) makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display can be augmented with an optional remote panel.
-12-volt models available in 20 A, 40 A and 60 A
-Microprocessor-controlled, multistage charging algorithms
-Settings for two and three-stage charging
-Settings for flooded, gel, AGM or lead-calcium batteries
-Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also compatible with a generator or other
-low-quality power sources
-Power factor corrected for efficient charging
-Ability to charge ‘dead’ batteries
-Battery temperature sensor available (Part #808-0232-01)
-Optional remote display includes a maximum charger output control (Part #808-8040-00)
-Reverse battery polarity protecti on
-Over and under-temperature protecti on
-DC over-voltage protection
-Battery overcharging protection
* Xantrex recommends, however, that it is safest not to install electrical equipment in these areas.
Multistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current d elivered to the batteries in three automatic stages:
-Bulk : Replaces 70-80% of the battery’s state-of-charge at the fastest possible rate.
-Absorption: Replenishes the remaining 20-30% of charge, bringing the battery to a full charge at a slow, safe rate.
-Float : Voltage is reduced and held constant in order to prevent damage and maintain batteries at a full charge.
Power Factor Corrected (PFC):
Less shorepower is required for charging batteries, freeing up more usable AC power for running electrical
devices and appliances and reducing the likelihood of tripping shorepower breakers.
Remote panel: 808-8040-00
Battery temperature sensor: 808-0232-01
CSA E60335-2-29, UL1564, and UL1236 including the Marine Supplement, drip test, and Ignition Protection ratings. CE Marked for the Low Voltage Directive (safety) and the EMC Directive. Complies with IEC 60335-2-29 including Australian deviations. Ingress protection rating IP32 per EN/IEC 60529. Complies with FCC Part 15B and Industry Canada ICES-003 Class B emissions limits. Complies with ABYC A-31.
1. 90 - 104 Vac ± 4 Vac output de-rated to 80% of full load current
2. For 20A and 40A charger, output current derates above 50°C. For 60 A charger, output current derates above 40°C. Highly Accelerated Life Tested (HALT) to -20°C.
Note: Specifications subject to change without notice.
Electrical Specifications are @ 25°C unless otherwise noted